MyBlog_笑著流淚II » Blog Archive » 武男亂講-最近借測的一台機器

我是武男, 24歲, 大家都叫我阿男...有的人還會叫我白目老百姓...找我的話請Google "武男" 就沒錯了~

武男亂講-最近借測的一台機器

Autor 白目研究生

是dy的

不對，應該是HP ProCurve J4903A Switch 2824

驗明正身

Power On

正視圖

console可以config的功能就大概列以下幾種，也還有其他的，不過沒有列出

//開機後的System Info
/*************************************************/

ProCurve J4903A Switch 2824
Firmware revision I.08.98

Copyright (C) 1991-2006 Hewlett-Packard Co. All Rights Reserved.

RESTRICTED RIGHTS LEGEND

Use, duplication, or disclosure by the Government is subject to restrictions
as set forth in subdivision (b) (3) (ii) of the Rights in Technical Data and
Computer Software clause at 52.227-7013.

HEWLETT-PACKARD COMPANY, 3000 Hanover St., Palo Alto, CA 94303

We’d like to keep you up to date about:
* Software feature updates
* New product announcements
* Special events

Please register your products now at: www.ProCurve.com

//setup現在連設定都可以包成這般Friendly
/*************************************************/

ProCurve Switch 2824 1-Jan-1990 12:16:18
==========================- CONSOLE – MANAGER MODE -============================
Switch SetupSystem Name : ProCurve Switch 2824
System Contact :
Manager Password : Confirm Password :
Logon Default : CLI Time Zone [0] : 0
Community Name : public Spanning Tree Enabled [No] : No

Default Gateway :
Time Sync Method [None] : TIMEP
TimeP Mode [Disabled] : Disabled

IP Config [DHCP/Bootp] : DHCP/Bootp
IP Address :
Subnet Mask :

Actions-> Cancel Edit Save Help

Enter System Name – up to 25 characters.
Use arrow keys to change field selection, <Space> to toggle field choices,
and <Enter> to go to Actions.

//walkMIB 這個功能就沒有看過了，以前都必須要用SNMP的網管工具在看，不過這邊可以直接在機器上看到專屬SWITCH的MIB Tree
/*************************************************/

walkMIB Walk through all instances of the object specified
displaying the MIB object names, instances and values.

HP 2824# walkMIB
ncomplete input: walkMIB
HP 2824# walkMIB
OBJECT-STR The mib object to start from.

//lockout-mac 可以鎖定有問題的MAC，在網管的VLAN底下
/*************************************************/

HP 2824(config)# lockout-mac
MAC-ADDR Enter MAC address for the ‘lockout-mac’
command/parameter.

//static-mac 可以指定每個VLAN PORT能用的MAC
/*************************************************/

static-mac Lock down a MAC address to a port on a vlan.
HP 2824(config)# static-mac
MAC-ADDR Enter MAC address for the ‘static-mac’
command/parameter.

//repeat 如果要重複上一個步驟的指令，除了按上鍵外，你也能用repeat重複執行
/*************************************************/